Search results for: 'Extended wheel stud'

20 PCS/SET M12 X P 1.5 / GR YARIS: EXTEND 35MM

20 PCS/SET M14 X P 1.5 / 30MM EXTENDED

20 PCS/SET M12 X P1.25 FOR IMPREZA GC/GD

20 PCS/SET M12 X P1.5 FOR EVO 110

20 PCS/SET M12 X P1.25 FOR FT86/FR-S/BRZ

20 PCS/SET M12 X P 1.5 FOR CIVIC EF/EG/EK

16 PCS/SET M12 X P 1.5 FOR CIVIC EF/EG/EK

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

20 PCS/SET THREAD: M12XP1.25 / LENGTH: 45MM OPEN-END TYPE / 60° CONICAL SEAT

20 PCS/SET THREAD: M12XP1.5 / LENGTH: 45MM OPEN-END TYPE / 60° CONICAL SEAT

20 PCS/SET THREAD: M12XP1.25 / LENGTH: 35MM OPEN-END TYPE / 60° CONICAL SEAT

20 PCS/SET THREAD: M12XP1.5 / LENGTH: 35MM OPEN-END TYPE / 60° CONICAL SEAT

4 PCS/SET

4 PCS/SET

Thread: M12xP1.5 / Length: 35mmClosed-End Type / 60° Conical Seat24 PCS/SET

Thread: M14xP1.5 / Length: 35mmClosed-End Type / 60° Conical Seat20 PCS/SET

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

Range: 245-285 mmBall stud: M142 PCS/SET

Range: 205-245 mmBall stud: M14* Hiace/Granvia H300: For Lowered Cars Use2 PCS/SET

Range: 90-110 mmBall stud: M10 2 PCS/SET

2 PCS/SET RANGE: 160-199MM BALL STUD: M10

2 PCS/SET RANGE: 65-75MM BALL STUD: M10

For Lifted Car UseAdjustment Range: 144175mm*Not For KDSS Models*Not For 04-15 TACOMA 2WD (except PRERUNNER)2 PCS/SET