Search results for: 'kit rear'

2 PCS/SET HELLAFLUSH STYLE UPRATED RUBBER BUSHES

4 PCS/SET HARD TIE ROD INCLUDED FOR SIR '88-91

2 PCS/SET FORGED ALUMINUM ARMS * FOR SPECIAL ORDER ONLY UPRATED RUBBER BUSHES

2 PCS/SET ROSE JOINT

6 PCS/SET UPRATED RUBBER BUSHES REPAIR KIT

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

2 PCS/SET FOR 1.52 INCH LOWERED VEHICLE CORRECT TOE IN FROM 0.5° TO 0° INCREASE CAMBER BY -1°

2 PCS/SET ROSE JOINTS

2 PCS/SET ROSE JOINTS

2 PCS/SET *FOR EXTREME CAMBER ONLY CAMBER KIT ADJUSTMENT RANGE: -4 DEGREES PLUS UPRATED RUBBER BUSHES

* For Accord '03-07/ TSX '04-08 Manual Transmission" Civic '92-96 or Integra '94-01 Subframe Swap Required3 MOUNTS/SET

2 PCS/SET

2 PCS/SET UPRATED RUBBER BUSHES.

* For Accord '03-07/ TSX '04-08 Manual Transmission3 MOUNTS/SET

2 PCS/SET FOR '98-02 CH1 TYPE-R UPRATED RUBBER BUSHES

Caster Adjustment Range: +0°2.5°* Civic EK '96-00: For USDM EJ6/7/8 Use Only32 PCS/SET

2 PCS/SET UPRATED RUBBER BUSHES.

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

2 PCS/SET UPRATED RUBBER BUSHES

2 PCS/SET UPRATED RUBBER BUSHES

2 PCS/SET ROSE JOINT *ACCORD 6TH JDM : FOR EURO-R / SIR / WAGON ONLY *ACCORD 7TH JDM & EUDM : FOR SEDAN ONLY

2 PCS/SET ROSE JOINT

2 PCS/SET UPRATED RUBBER BUSHES