Search results for: 'gs300 front roll center adjust'

2 PCS/SET *FOR '14-15 SI COMPLIANCE BUSHING: 16MM UPRATED RUBBER BUSHES

Tubular TypeHarden Rubber EquippedStab. Link Included* #7214 Compatible6 PCS/SET

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

28 mm* DC5: Not For JDM Type-R Use3 PCS/SET

4 PCS/SET * FOR '14-15 SI ' COMPLIANCE BUSHING: 16MM UPRATED RUBBER BUSHES

1 PCS/SET FOR CL7/CL9

4 PCS/SET ROSE JOINT

Tubular TypePillow Ball EquippedStab. Link Included* #7214 Compatible6 PCS/SET

2 PCS/SET UPRATED RUBBER BUSHES.

2 PCS/SET UPRATED RUBBER BUSHES.

2 PCS/SET ORIGINAL REPLACEMENT

2 PCS/SET

2 PCS/SET CAMBER ADJUSTABLE -1.5 +0.5 DEGREES * FOR USDM - M14 BALL STUD

2 PCS/SET CAMBER ADJUSTABLE -0.5 +1.5 DEGREES * FOR USDM - M14 BALL STUD

6 PCS/SET ROSE JOINTS

2 PCS/SETOE TYPE

4 PCS/SET OFFSET FUNCTION CAMBER + CASTER ADJUSTMENT UPRATED RUBBER BUSHES

6 PCS/SET INCLUDING HARD TIE ROD + STEERING BOOT

6 PCS/SET UPRATED RUBBER BUSHES CAMBER-0.5°, CASTER+0.5°

2 PCS/SET FITS FRONT OR REAR UPPER ARM OE STYLE.

2 PCS/SET FOR #7768 FRONT SIDE, 28MM

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

16 PCS/SET M12 X P 1.5 FOR CIVIC EF/EG/EK

6 PCS/SET ALUMINUM.