Search results for: 'honda p 6'

16 PCS/SET M12 X P 1.5 FOR CIVIC EF/EG/EK

2 PCS/SET REAR SIDE

2 PCS/SET OE STYLE.

2 PCS/SET OE STYLE.

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

25.4 mm 5 PCS/SET

28 mm* DC5: Not For JDM Type-R Use3 PCS/SET

For SI 2.4L 6MT Use1 PCS/SET

25.4 mm* USDM cars: SI (EM1) or JDM type LCA and end links required5 PCS/SET

OE Replacement
2 PCS/SET
M12 Ball Stud
* Not for '14-15 SI Use

Harden Rubber Equipped2PCS/SET

1 PCS/SET * FOR EG4/EG6/EG9/DC2* FOR RHD MODELS * NOT FOR ABS-BUSHES MODELS

2 PCS/SET UPRATED RUBBER BUSHES

2 PCS/SET ROSE JOINT

1 PCS/SET FOR LHD & RHD CARS

Tubular TypeHarden Rubber EquippedStab. Link Included* #7214 Compatible6 PCS/SET

1 PCS/SET AT, STREET VERSION

1 PCS/SET

2 PCS/SET ON THE ANTI ROLL BAR + COLLAR INTEGRA TYPE-R

1 PCS/SET AT / FRONT SIDE / STREET VERSION / 2.0L

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

2 PCS/SET OE REPLACEMENT OD=35.5MM

1 PCS/SET FOR 1.5T/2.4 CVT

6 PCS/SET CIVIC '92-96 OR INTEGRA '94-01 SUBFRAME SWAP REQUIRED