Search results for: 'mm 2 3'
-
FRONT ANTI ROLL BAR - HONDA ACCORD 10TH5 PCS/SET 30MM
£316.63 £263.86Delivery in
15-22 Working days -
FRONT LOWER ARM - HONDA CIVIC 9TH2 PCS/SET *FOR '14-15 SI COMPLIANCE BUSHING: 16MM UPRATED RUBBER BUSHES
£396.59 £330.49Delivery in
15-22 Working days -
FRONT LOWER ARM HONDA INTEGRA2 PCS/SET M14 BALL JOINT MOUNTING HOLE *FOR TYPE-S '05-06 ROSE JOINT
£942.71 £785.59Delivery in
15-22 Working days -
FRONT UPPER BALL JOINT HONDA CR-V, HONDA. ODYSSEY JDM2 PCS/SET OE REPLACEMENT OD=35.5MM
£58.40 £48.67Delivery in
1-2 Working days -
REAR SWAY BAR HONDA CIVIC, CRX, INTEGRA3 PCS/SET HARDRACE: 25.4MM OE: 18MM * EG TYPE-R ONLY * DC2 TYPE-R ONLY
£197.89 £164.91Delivery in
1-2 Working days -
-
-
HONDA CIVIC/INTEGRA FRONT 4Hx100 36mm HUB KIT 2PCS/SET EXTENDED WHEEL STUDSFor 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).
£392.06 £326.72Delivery in
15-22 Working days -
HONDA CIVIC EG/EK FRONT WHEEL BEARING KIT 2PCS MADE IN JAPAN ID=43mm/OD=79mmMade in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only
£196.03 £163.36Delivery in
3-7 Working days -
-
FRONT SWAY BAR HONDA CITY, FIT3 PCS/SET FRONT SIDE 28MM
£277.06 £230.88Delivery in
15-22 Working days -
FRONT STABILIZER BUSHING HONDA NSX2 PCS/SET 17.2MM / FOR 18.3MM OE BAR * FITS: -STANDARD CUOPE '91-05 -TYPE-S '97-05 -ZANARDI EDITION '99
£33.53 £27.94Delivery in
15-22 Working days -
REAR STABILIZER BUSHING HONDA NSX2 PCS/SET 16.3MM / FOR 17.5MM OE BAR * FITS: -STANDARD CUOPE '91-05 -TARGA '95-01 -TYPE-R '93-95 & '02-05
£33.53 £27.94Delivery in
15-22 Working days -
