Search results for: 'sets'

2 PCS/SET ON THE ANTI ROLL BAR + COLLAR INTEGRA TYPE-R

4 PCS/SET UPRATED RUBBER BUSHES

14 PCS/SET UPRATED RUBBER BUSHES

2 PCS/SET FOR DC5 / DC5 TYPE-R / RSX UPSIDE DOWN INSTALLATION.

2 PCS/SET UPRATED RUBBER BUSHES

1 PCS/SET * FOR EG4/EG6/EG9/DC2* FOR RHD MODELS * NOT FOR ABS-BUSHES MODELS

1 PCS/SET FOR MT RIGHT SIDE

2 PCS/SET M14 BALL JOINT MOUNTING HOLE *FOR TYPE-S '05-06 ROSE JOINT

2 PCS/SET M14 BALL JOINT MOUNTING HOLE *FOR TYPE-S '05-06 UPRATED RUBBER BUSHES

2 PCS/SET 24MM, SO/NON TYPE-R

1 PCS/SET

1 PCS/SET AT / FRONT SIDE / STREET VERSION / 2.0L

1 PCS/SET (RACE VERSION)

2 PCS/SET M12 BALL JOINT MOUNTING HOLE *FOR BASE MODEL '02-06 *FOR TYPE-S '02-04 ROSE JOINT

1 PCS/SET * FOR LEFT-HAND DRIVE CARS

Tubular TypePillow Ball EquippedStab. Link Included* #7214 Compatible6 PCS/SET

Tubular TypeHarden Rubber EquippedStab. Link Included* #7214 Compatible6 PCS/SET

2 PCS/SET M12 BALL JOINT MOUNTING HOLE *FOR BASE MODEL '02-06 *FOR TYPE-S '02-04 UPRATED RUBBER BUSHES

Range: 60-70mm* For 2WD Use Only2 PCS/SET

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

2 PCS/SET CAMBER/CASTER KIT CAMBER/CASTER +/-2 DEGREES BUSHINGS NOT INCLUDED

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

2 PCS/SET OFFSET BUSHING INCREASE CASTER UPRATED RUBBER BUSHES