Search results for: 'mm 8'

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

2 PCS/SET OE REPLACEMENT OD=35.5MM

28 mm* DC5: Not For JDM Type-R Use3 PCS/SET

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

25.4 mm 5 PCS/SET

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

30 mm2-Way Adjustable3 PCS/SET

Range: 60-70mm* For 2WD Use Only2 PCS/SET

25.4 mm5 PCS/SET

5 PCS/SET FOR HONDA CIVIC, CRX, INTEGRA

2 PCS/SET * EXTREME LOW * 0.5KG LIGHTER THAN OE PER SIDE * NOT COMPATIBLE WITH RC BALL JOINTS ALUMUNUM 25MM SHORTER DESIGN

2 PCS/SET REAR 15MM

2 PCS/SET M12 BALL JOINT MOUNTING HOLE *FOR BASE MODEL '02-06 *FOR TYPE-S '02-04 UPRATED RUBBER BUSHES

3 PCS/SET HARDRACE: 25.4MM OE: 18MM * EG TYPE-R ONLY * DC2 TYPE-R ONLY

2 PCS/SET 18MM

2 PCS/SET REAR - 19MM

2 PCS/SET M12 BALL JOINT MOUNTING HOLE *FOR BASE MODEL '02-06 *FOR TYPE-S '02-04 ROSE JOINT