Search results for: 'kit 2'

6 PCS/SET INCLUDING HARD TIE ROD + STEERING BOOT

2 PCS/SET HELLAFLUSH STYLE UPRATED RUBBER BUSHES

6 PCS/SET CIVIC '92-96 OR INTEGRA '94-01 SUBFRAME SWAP REQUIRED

2 PCS/SET UPRATED RUBBER BUSHES.

2 PCS/SET

2 PCS/SET UPRATED RUBBER BUSHES.

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

2 PCS/SET CAMBER KIT UPRATED RUBBER BUSHES

2 PCS/SET CAMBER KIT UPRATED RUBBER BUSHES

2 PCS/SET UPRATED RUBBER BUSHES.

2 PCS/SET CAMBER/CASTER KIT CAMBER/CASTER +/-2 DEGREES BUSHINGS NOT INCLUDED

2 PCS/SET

2 PCS/SET SOLID ALUMINUM FOR MT

2 PCS/SET FOR EXTREME CAMBER ONLY -4 DEGREE PLUS UPRATED RUBBER BUSHES.

Caster Adjustment Range: +0°2.5°* Civic EK '96-00: For USDM EJ6/7/8 Use Only32 PCS/SET

22 PCS/SET * NOT FOR USDM EP3 SI UPRATED RUBBER BUSHES

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

4 PCS/SET * FOR CIVIC EG/EK/DC2 * FOR DOHC

28 PCS/SET USDM FOR 88-91 CRX CIVIC EF WITH 3 BUSHINGS REAR LOWER ARMS THAT ACCEPT THE EYE TYPE REAR SHOCK UPRATED RUBBER BUSHES

8 PCS/SET 25.4MM ANTI ROLL BAR NOT FOR EK9 TYPE-R

8 PCS/SET 25.4MM ANTI ROLL BAR

2 PCS/SET UPRATED RUBBER BUSHES

2 PCS/SET FORGED ALUMINUM ARMS * FOR SPECIAL ORDER ONLY UPRATED RUBBER BUSHES