Search results for: '6327 honda civic 92 00 strut bushing'

2 PCS/SET ON THE ANTI ROLL BAR + COLLAR INTEGRA TYPE-R

Adjustable - Camber -1.5°+0.5°
M12 Ball Stud

* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only

2 PCS/SET

Adjustable - Camber -0.5°+1.5°
M12 Ball Stud

* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only
2 PCS/SET

2 PCS/SET OE STYLE

2 PCS/SET * NOT FOR EF8/EF9 SIR OE STYLE.

2 PCS/SET ROSE JOINTS

2 PCS/SET * EXTREME LOW * 0.5KG LIGHTER THAN OE PER SIDE * NOT COMPATIBLE WITH RC BALL JOINTS ALUMUNUM 25MM SHORTER DESIGN

2 PCS/SET

28 mm* DC5: Not For JDM Type-R Use3 PCS/SET

6 PCS/SET UPRATED RUBBER BUSHES. INCLUDING COMPLIANCE BUSHING EK JDM 97-00 / USDM EK 99-00 SI

6 PCS/SET UPRATED RUBBER BUSHES CAMBER-0.5°, CASTER+0.5°

* For Accord '03-07/ TSX '04-08 Manual Transmission" Civic '92-96 or Integra '94-01 Subframe Swap Required3 MOUNTS/SET

2 PCS/SET UPRATED RUBBER BUSHES

5 PCS/SET FOR DC2 JDM

4 PCS/SET

Harden Rubber Equipped2 PCS/SET

26 PCS/SET UPRATED RUBBER BUSHES. EK-JDM 96-00 /EK SI-USDM 99-00

3 PCS/SET

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

2 PCS/SET OE STYLE UPRATED RUBBER BUSHES

7 PCS/SET 25.4MM * 90° BALL JOINT TYPE END LINKS REQUIRED, OR SEE #6480 * LCA WITH END LINK MOUNTING HOLES REQUIRED FOR NON ANTI ROLL BAR BUSHES CARS, OR SEE #6247

25.4 mm5 PCS/SET

1 PCS/SET