Search results for: 'FRONT 4'

Adjustable - Camber -1.5°+0.5°
M12 Ball Stud

* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only

2 PCS/SET

Adjustable - Camber -0.5°+1.5°
M12 Ball Stud

* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only
2 PCS/SET

4 PCS/SET ROSE JOINTS

2 PCS/SET * EXTREME LOW * 0.5KG LIGHTER THAN OE PER SIDE * NOT COMPATIBLE WITH RC BALL JOINTS ALUMUNUM 25MM SHORTER DESIGN

2 PCS/SET OFFSET BUSHING INCREASE CASTER UPRATED RUBBER BUSHES

2 PCS/SET *FOR '14-15 SI COMPLIANCE BUSHING: 16MM UPRATED RUBBER BUSHES

Tubular TypeHarden Rubber EquippedStab. Link Included* #7214 Compatible6 PCS/SET

2 PCS/SET ADJUSTABLE CASTER +1 -0.5 DEGREE

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

28 mm* DC5: Not For JDM Type-R Use3 PCS/SET

4 PCS/SET * FOR '14-15 SI ' COMPLIANCE BUSHING: 16MM UPRATED RUBBER BUSHES

Tubular TypePillow Ball EquippedStab. Link Included* #7214 Compatible6 PCS/SET

2 PCS/SET UPRATED RUBBER BUSHES.

2 PCS/SET CAMBER ADJUSTABLE -1.5 +0.5 DEGREES * FOR USDM - M14 BALL STUD

2 PCS/SET CAMBER ADJUSTABLE -0.5 +1.5 DEGREES * FOR USDM - M14 BALL STUD

6 PCS/SET UPRATED RUBBER BUSHES CAMBER-0.5°, CASTER+0.5°

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

2 PCS/SET FIT: PEUGEOT 206/207/208 FRONT SIDE RANGE: 320-359MM BALL STUD: M10

3 PCS/SET AT/MT (EXCEPT FRONT 2 MOUNTS - BELOW THE RADIATOR)

4 PCS/SET ROSE JOINTS

4 PCS/SET HEIGHT +10MM BALL JOINT INCLUDED

2 PCS/SET HEIGHT +15MM

2 PCS/SET HEIGHT +15MM

2 PCS/SET UPRATED RUBBER BUSHES.