Search results for: 'rear toe control arm rubber 2pcs'

2 PCS/SET UPRATED RUBBER BUSHES.

19 mm2 PCS/SET

6 PCS/SET UPRATED RUBBER BUSHES. INCLUDING COMPLIANCE BUSHING EK JDM 97-00 / USDM EK 99-00 SI

2 PCS/SET REAR- 17MM, FD/SI/USDM

2 PCS/SET ROSE JOINT

2 PCS/SET USDM TYPE-R 22MM

2 PCS/SET LENGTH: 90MM * FOR LOWERED CR-V 1ST

2 PCS/SET REAR- 21MM, FD/TYPE-R/JDM

OE Replacement
2 PCS/SET
M12 Ball Stud
* Not for '14-15 SI Use

4 PCS/SET * FOR '14-15 SI ' COMPLIANCE BUSHING: 16MM UPRATED RUBBER BUSHES

1 PCS/SET FOR FD K20 USDM AT/MT RIGHT SIDE - REAR

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

Adjustable - Camber -1.5°+0.5°
M12 Ball Stud

* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only

2 PCS/SET

Adjustable - Camber -0.5°+1.5°
M12 Ball Stud

* CIVIC 10th: Not for US Spec
* CIVIC 11th: For China Spec Only
2 PCS/SET

OE Replacement
M14 Ball Stud

* Civic 10th: For US Spec Only
* CR-V 5th: For US Spec Only
* Civic 11th: Not For China Spec
2 PCS/SET

2 PCS/SET

1 PCS/SET

4 PCS/SET ROSE JOINTS

26 PCS/SET UPRATED RUBBER BUSHES. EK-JDM 96-00 /EK SI-USDM 99-00

2 PCS/SET LENGTH: 55MM EXTREME LOWER CAR ONIY

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

6 PCS/SET * FOR DC5 * FOR USDM EP3 SI UPRATED RUBBER BUSHES