Search results for: 'kits ball'

OE Replacement 2 PCS/SET

2 PCS/SET OE REPLACEMENT

2 PCS/SET OE Replacement

2 PCS/SET CAMBER ADJUSTABLE -0.5 +1.5 DEGREES * FOR USDM - M14 BALL STUD

1 PCS/SET

2 PCS/SET OE REPLACEMENT OD=35.5MM

OE Replacement
M14 Ball Stud

* Civic 10th: For US Spec Only
* CR-V 5th: For US Spec Only
* Civic 11th: Not For China Spec
2 PCS/SET

OE Replacement
2 PCS/SET
M12 Ball Stud
* Not for '14-15 SI Use

22 PCS/SET * NOT FOR USDM EP3 SI UPRATED RUBBER BUSHES

26 PCS/SET JDM FOR 88-91 CRX CIVIC EF WITH 2 BUSHINGS REAR LOWER ARMS THAT ACCEPT THE EYE TYPE REAR SHOCK UPRATED RUBBER BUSHES

4 PCS/SET ROSE JOINT

4 PCS/SET UPRATED RUBBER BUSHES FOR DA 90-93

4 PCS/SET HARD TIE ROD INCLUDED FOR SIR '88-91

2 PCS/SET CAMBER ADJUSTABLE -1.5 +0.5 DEGREES * FOR USDM - M14 BALL STUD

6 PCS/SET UPRATED RUBBER BUSHES REPAIR KIT

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

* For Accord '03-07/ TSX '04-08 Manual Transmission" Civic '92-96 or Integra '94-01 Subframe Swap Required3 MOUNTS/SET

* For Accord '03-07/ TSX '04-08 Manual Transmission3 MOUNTS/SET

4 PCS/SET * FOR CIVIC EG/EK/DC2 * FOR DOHC

Caster Adjustment Range: +0°2.5°* Civic EK '96-00: For USDM EJ6/7/8 Use Only32 PCS/SET

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).