Search results for: 'gtr r35 front sway bar 36mm'

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

7 PCS/SET 25.4MM * 90° BALL JOINT TYPE END LINKS REQUIRED, OR SEE #6480 * LCA WITH END LINK MOUNTING HOLES REQUIRED FOR NON ANTI ROLL BAR BUSHES CARS, OR SEE #6247

3 PCS/SET HARDRACE: 25.4MM OE: 18MM * EG TYPE-R ONLY * DC2 TYPE-R ONLY

7 PCS/SET

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

2 PCS/SET

2 PCS/SET 18MM

2 PCS/SET ON THE ANTI ROLL BAR + COLLAR INTEGRA TYPE-R

2 PCS/SET ON THE ANTI ROLL BAR + COLLAR INTEGRA TYPE-R

2 PCS/SET JDM TYPE-R, FRONT 25MM

2 PCS/SET USDM TYPE-R, FRONT-24MM

2 PCS/SET 21MM

8 PCS/SET 25.4MM ANTI ROLL BAR

2 PCS/SET 24MM, SO/NON TYPE-R D

4 PCS/SET UPRATED RUBBER BUSHES

2 PCS/SET OE STYLE ROSE JOINT

2 PCS/SET OE STYLE ROSE JOINT

4 PCS/SET ROSE JOINT

2 PCS/SET CAMBER/CASTER KIT CAMBER/CASTER +/-2 DEGREES BUSHINGS NOT INCLUDED

2 PCS/SET BELOW THE RADIATOR

2 PCS/SET OE STYLE UPRATED RUBBER BUSHES

6 PCS/SET UPRATED RUBBER BUSHES INCLUDING COMPLIANCE BUSHING

2 PCS/SET 24MM, SO/NON TYPE-R

2 PCS/SET *SUITABLE FOR INTEGRA DC2 / CIVIC EG WITH DC2 ANTI ROLL BAR CONVERSION