Search results for: 'hond''

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

2 PCS/SET OE REPLACEMENT OD=35.5MM

2 PCS/SET * FOR JDM EG/TYPE-R ALUMINUM / JDM UPRATED RUBBER BUSHES

2 PCS/SET OE STYLE / USDM UPRATED RUBBER BUSHES SHOCK BUSHING: 50MM

1 PCS/SET * FOR LEFT-HAND DRIVE CARS

1 PCS/SET

5 PCS/SET

7 PCS/SET 25.4MM * 90° BALL JOINT TYPE END LINKS REQUIRED, OR SEE #6480 * LCA WITH END LINK MOUNTING HOLES REQUIRED FOR NON ANTI ROLL BAR BUSHES CARS, OR SEE #6247

2 PCS/SET OE Replacement

3 PCS/SET FOR MT LOCATION: LEFT/RIGHT/REAR SIDE

2 PCS/SET ALUMINUM / USDM UPRATED RUBBER BUSHES SHOCK BUSHING: 40MM

2 PCS/SET *FOR EXTREME CAMBER ONLY CAMBER KIT ADJUSTMENT RANGE: -4 DEGREES PLUS UPRATED RUBBER BUSHES

2 PCS/SET *FOR EXTREME CAMBER ONLY ALUMINUM / USDM 20MM EXTENDED UPRATED RUBBER BUSHES SHOCK BUSHING: 40MM

2 PCS/SET * FOR POWER STEERING RACK

2 PCS/SET OE STYLE ROSE JOINT

5 PCS/SET DIRECT BOLT-ON PARTS IS COMPATIBLE WITH THESE ANTI REAR ANTI ROLL BARS: * HARDRACE 25.4MM HOLLOW BAR * MUGEN 26MM SWAYBAR * OEM INTEGRA/CIVIC TYPE R 22-23MM ANTI ROLL BAR

8 PCS/SET 25.4MM ANTI ROLL BAR

2 PCS/SET

2 PCS/SET ALUMINUM / USDM UPRATED RUBBER BUSHES SHOCK BUSHING: 50MM

2 PCS/SET OFFSET BUSHING INCREASE CASTER *NOT COMPATIBLE WITH #Q0098 & #Q0137 ROSE JOINT

2 PCS/SET OFFSET BUSHING INCREASE CASTER UPRATED RUBBER BUSHES

2 PCS/SET EK: USDM EK ONLY ROSE JOINT OILLESS BEARING

5 PCS/SET FOR DOHC

2 PCS/SET 21MM