Search results for: 'bearing sets'

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

26 PCS/SET UPRATED RUBBER BUSHES. EK-JDM 96-00 /EK SI-USDM 99-00

26 PCS/SET EK USDM 96-99, UPRATED RUBBER BUSHES.

2 PCS/SET EK: USDM EK ONLY ROSE JOINT OILLESS BEARING

2 PCS/SET RANGE: 81-91MM BALL STUD: M10 *PORSCHE 997: FOR REAR SIDE

5 PCS/SET NOT FOR EK9 TYPE-R

2 PCS/SET

8 PCS/SET 25.4MM ANTI ROLL BAR NOT FOR EK9 TYPE-R

6 PCS/SET CIVIC '92-96 OR INTEGRA '94-01 SUBFRAME SWAP REQUIRED

25.4 mm* USDM cars: SI (EM1) or JDM type LCA and end links required5 PCS/SET

* For Accord '03-07/ TSX '04-08 Manual Transmission" Civic '92-96 or Integra '94-01 Subframe Swap Required3 MOUNTS/SET

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

2 PCS/SET

1 PCS/SET * FOR EK4* FOR RHD MODELS * NOT FOR ABS-BUSHES MODELS

2 PCS/SET ROSE JOINT

2 PCS/SET ROSE JOINT

2 PCS/SET UPRATED RUBBER BUSHES.

2 PCS/SET * FOR POWER STEERING RACK

5 PCS/SET FOR EK MT/AT RACING VERSION

2 PCS/SET

2 PCS/SET * FOR LEFT-HAND DRIVE CARS ONLY

2 PCS/SET OE Replacement

5 PCS/SET