Search results for: 'bmw 3 series e90 e92 rear camber kit pillowball 2pcs set'

6 PCS/SET CIVIC '92-96 OR INTEGRA '94-01 SUBFRAME SWAP REQUIRED

* For Accord '03-07/ TSX '04-08 Manual Transmission" Civic '92-96 or Integra '94-01 Subframe Swap Required3 MOUNTS/SET

4 PCS/SET ROSE JOINT

2 PCS/SET

2 PCS/SET CAMBER KIT ROSE JOINT *FOR DA 90-93

4 PCS/SET UPRATED RUBBER BUSHES FOR DA 90-93

1 PCS/SET

2 PCS/SET UPRATED RUBBER BUSHES

2 PCS/SET CAMBER KIT ROSE JOINT *FOR DA 90-93

2 PCS/SET *FOR EXTREME CAMBER ONLY CAMBER KIT ADJUSTMENT RANGE: -4 DEGREES PLUS UPRATED RUBBER BUSHES

2 PCS/SET ROSE JOINT

2 PCS/SET FOR EXTREME CAMBER ONLY -4 DEGREE PLUS UPRATED RUBBER BUSHES.

2 PCS/SET CAMBER KIT UPRATED RUBBER BUSHES

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

2 PCS/SET ROSE JOINT

2 PCS/SET TOE KIT ROSE JOINT

8 PCS/SET 25.4MM ANTI ROLL BAR NOT FOR EK9 TYPE-R

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

2 PCS/SET

2 PCS/SET *FOR JDM / SI USDM ROSE JOINT FRONT SIDE + SHOCK BUSHING UPRATED RUBBER COMPLIANCE BUSHING

2 PCS/SET ROSE JOINT

2 PCS/SET UPRATED RUBBER BUSHES

2 PCS/SET ALUMINUM BODY ROSE JOINT