Search results for: 'honda+p+9'

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

1 PCS/SET * FOR EK4* FOR RHD MODELS * NOT FOR ABS-BUSHES MODELS

2 PCS/SET SOLID ALUMINUM

1 PCS/SET (RACE VERSION)

25.4 mm* USDM cars: SI (EM1) or JDM type LCA and end links required5 PCS/SET

Harden Rubber Equipped2 PCS/SET

* For Accord '03-07/ TSX '04-08 Manual Transmission" Civic '92-96 or Integra '94-01 Subframe Swap Required3 MOUNTS/SET

2 PCS/SET

2 PCS/SET

1 PCS/SET FOR LHD & RHD CARS

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

1 PCS/SET

5 PCS/SET NOT FOR EK9 TYPE-R

2 PCS/SET REAR - 19MM

2 PCS/SET FOR EXTREME CAMBER ONLY -4 DEGREE PLUS UPRATED RUBBER BUSHES.

6 PCS/SET CIVIC '92-96 OR INTEGRA '94-01 SUBFRAME SWAP REQUIRED

1 PCS/SET RACE VERSION LOCATION: LEFT SIDE

2 PCS/SET * FOR LEFT-HAND DRIVE CARS ONLY

2 PCS/SET *FOR EXTREME CAMBER ONLY CAMBER KIT ADJUSTMENT RANGE: -4 DEGREES PLUS UPRATED RUBBER BUSHES

2 PCS/SET REAR 15MM

2 PCS/SET LENGTH: 55MM

2 PCS/SET OE REPLACEMENT OD=35.5MM

2 PCS/SET *FOR USDM EJ6/7/8 ROSE JOINT