Search results for: 'gs300 front roll center adjust'

2 PCS/SET UPRATED RUBBER BUSHES.

2 PCS/SET FOR EXTREME CAMBER ONLY -4 DEGREE PLUS UPRATED RUBBER BUSHES.

2 PCS/SET REAR - 19MM

2 PCS/SET REAR 15MM

2 PCS/SET FOR JDM TYPE-R REAR 23MM

2 PCS/SET REAR - 19MM

2 PCS/SET REAR 15MM

2 PCS/SET ON THE ANTI ROLL BAR + COLLAR INTEGRA TYPE-R

2 PCS/SET

2 PCS/SET OFFSET BUSHING INCREASE CASTER *NOT COMPATIBLE WITH #Q0098 & #Q0137 ROSE JOINT

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

2 PCS/SET STEEL BODY *FOR OE ANTI ROLL BAR

2 PCS/SET UPSIDE DOWN INSTALLATION *FOR TRACK & MORE THAN 2-INCH LOWERED ONLY

2 PCS/SET LOWERED CAR VERSION

2 PCS/SET * EXTREME LOW * 0.5KG LIGHTER THAN OE PER SIDE * NOT COMPATIBLE WITH RC BALL JOINTS ALUMUNUM 25MM SHORTER DESIGN

2 PCS/SET OFFSET BUSHING INCREASE CASTER UPRATED RUBBER BUSHES

Tubular TypeHarden Rubber EquippedStab. Link Included* #7214 Compatible6 PCS/SET

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only

Tubular TypePillow Ball EquippedStab. Link Included* #7214 Compatible6 PCS/SET

4 PCS/SET OFFSET FUNCTION CAMBER + CASTER ADJUSTMENT UPRATED RUBBER BUSHES

6 PCS/SET UPRATED RUBBER BUSHES CAMBER-0.5°, CASTER+0.5°

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

20 PCS/SET M12 X P 1.5 FOR CIVIC EF/EG/EK

2 PCS/SET SOLID ALUMINUM