Search results for: 'part p'

3 PCS/SET 17MM

2 PCS/SET FOR SPORT 1.4T TOE IN FROM 0.2° TO 0.1°/ADD NEGATIVE CAMBER BY 1°

2 PCS/SET FOR EXTREME CAMBER & LOWERED ROSE JOINT

2 PCS/SET ADJUSTMENT RANGE: +/-3 DEGREES ROSE JOINT

1 PCS/SET FOR LHD MODELS * FOR NON-RUBICON MODELS * REQUIRES #Q0590 TO INSTALL STEERING STABLILZER

1 PCS/SET FOR RHD MODELS ADJUSTABLE - FOR 04 LIFT UPRATED RUBBER + ROSE JOINT

2 PCS/SET FOR 24 LIFT UPRATED RUBBER BUSHES

2 PCS/SET

2 PCS/SET 2 4 INCH LIFT UPRATED RUBBER BUSHES

2 PCS/SET LOWER ARM DROPPED BY 50MM

2 PCS/SET LOWER MOUNTS EXTENDED BY 50MM

1 PCS/SET ADJUSTABLE - FOR 04.5 LIFT UPRATED RUBBER + ROSE JOINT

2 PCS/SET HEIGHT +10MM * 19 INCH UP WHEELS REQUIRED

2 PCS/SET ADJUSTABLE CASTER +1 -0.5 DEGREE

2 PCS/SET UPRATED RUBBER BUSHES

2 PCS/SET UPPER MOUNTS EXTENDED BY 25MM

2 PCS/SET ROSE JOINT OFFSET FUNCTION / CASTER +1 DEGREE

4 PCS/SET

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

1 PCS/SET * FOR LEFT-HAND DRIVE ONLY

2 PCS/SET

1 PCS/SET FOR 3+ LIFT

1 PCS/SET FOR 6AT / '11-12 8AT TOP MOUNTING BOLT : M8

1 PCS/SET FOR '12-16 8AT TOP MOUNTING BOLT : M10