FORD

FRONT STRUT BRACE

1 PCS/SET * FOR NON-2.3 ST

FRONT LOWER BRACE

1 PCS/SET

MIDDLE LOWER BRACE

1 PCS/SET * FOR NON-2.3 ST

ADD ON REAR ANTI ROLL BAR

3 PCS/SET FOR TORSION BEAM REAR AXLE 17MM

FRONT ANTI ROLL BAR

5 PCS/SET FOR NON-ST & 2.3 ST 28MM

REAR ANTI ROLL BAR

5 PCS/SET FOR MULTI-LINK REAR AXLE 22MM

UPRATED LEFT ENGINE MOUNT

1 PCS/SET FOR ST & RS

UPRATED ENGINE MOUNT SET

3 PCS/SET * FOR ST/RS

FRONT GEOMETRY CORRECTION SPACER

2 PCS/SET HEIGHT +10MM * FOR 2.3 ST

MIDDLE LOWER BRACE

1 PCS/SET *FOR 2.3 ST

FRONT STRUT BRACE

1 PCS/SET * FOR 2.3 ST* FOR LHD

REAR ANTI ROLL BAR

5 PCS/SET FOR 2.3 ST HATCHBACK 25.4MM

REAR TOE CONTROL ARM ADJUSTABLE

2 PCS/SET UPRATED RUBBER BUSHES.

REAR CAMBER ARM ADJUSTABLE

2 PCS/SET UPRATED RUBBER BUSHES

UPRATED LEFT ENGINE MOUNT

1 PCS/SET * NOT FOR DIESEL ENGINE WITH POWERSHIFT GEARBOX

FRONT GEOMETRY CORRECTION SPACER

4 PCS/SET HEIGHT +8MM BALL JOINT INCLUDED 15MM AT THE TOP / 18MM AT THE BASE OF TAPER *FOCUS MK2: NOT FOR RS

FRONT GEOMETRY CORRECTION SPACER

4 PCS/SET HEIGHT +8MM BALL JOINT INCLUDED 18MM AT THE TOP/21MM AT THE BASE OF TAPER *FOCUS MK2: NOT FOR RS

FRONT REINFORCED TOP MOUNT

2 PCS/SET

FRONT LOWER BALL JOINT

2 PCS/SET 18MM AT THE TOP OF TAPER 21MM AT THE BASE OF TAPER *FOCUS MK2: NOT FOR RS OE STYLE

FRONT LOWER BALL JOINT

2 PCS/SET 15MM AT THE TOP OF TAPER 18MM AT THE BASE OF TAPER *FOCUS MK2: NOT FOR RS OE STYLE

FRONT LOWER ARM BUSH

4 PCS/SET UPRATED RUBBER BUSHES.

FRONT LOWER ARM BUSH - REAR

2 PCS/SET LOCATION: REAR SIDE / BIG UPRATED RUBBER BUSHES

FRONT LOWER CONTROL ARM

2 PCS/SET BALL JOINT NOT INCLUDED UPRATED RUBBER BUSHES

ROLL CENTRE TIE ROD END

2 PCS/SET NOT COMPATIBLE WITH #7651 ON FOCUS MK3