HONDA CIVIC EK

FRONT LOWER CONTROL ARM

2 PCS/SET *FOR USDM EJ6/7/8 UPRATED RUBBER BUSHES

REAR LOWER CONTROL ARM

2 PCS/SET ALUMINUM BODY UPRATED RUBBER BUSHES

REAR LOWER CONTROL ARM

2 PCS/SET ALUMINUM BODY ROSE JOINT

FRONT TRACTION BAR

7 PCS/SET

INNER TIE ROD & ROLL CENTRE TIE ROD END

6 PCS/SET INCLUDING HARD TIE ROD + STEERING BOOT

FRONT LOWER CONTROL ARM

2 PCS/SET *FOR USDM EJ6/7/8 ROSE JOINT

FRONT LOWER CONTROL ARM

2 PCS/SET OE STYLE/BLUE COMPLIANCE BUSHING INCLUDED *FOR JDM / SI USDM UPRATED RUBBER BUSHES

REAR LOWER CONTROL ARM

2 PCS/SET ALUMINUM BODY / GOLD UPRATED RUBBER BUSHES

REAR UPPER ARM ADJUSTABLE

2 PCS/SET *FOR EXTREME CAMBER ONLY CAMBER KIT ADJUSTMENT RANGE: -4 DEGREES PLUS UPRATED RUBBER BUSHES

REAR CAMBER ARM ADJUSTABLE

2 PCS/SET UPRATED RUBBER BUSHES.

REAR CAMBER ARM ADJUSTABLE

2 PCS/SET UPRATED RUBBER BUSHES.

FRONT CAMBER ARM ADJUSTABLE

2 PCS/SET UPRATED RUBBER BUSHES

FRONT CAMBER ARM ADJUSTABLE

2 PCS/SET UPRATED RUBBER BUSHES.

REAR CAMBER ARM ADJUSTABLE

2 PCS/SET FOR EXTREME CAMBER ONLY -4 DEGREE PLUS UPRATED RUBBER BUSHES.

36MM FRONT WHEEL HUB & BEARING KIT

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

REAR UPPER ARM ADJUSTABLE

2 PCS/SET CAMBER KIT UPRATED RUBBER BUSHES

REAR TOE ARM ADJUSTABLE

2 PCS/SET TOE KIT UPRATED RUBBER BUSHES

FRONT CAMBER ARM ADJUSTABLE

2 PCS/SET UPRATED RUBBER BUSHES

REAR TOE ARM ADJUSTABLE

2 PCS/SET TOE KIT ROSE JOINT

REAR UPPER ARM ADJUSTABLE

2 PCS/SET CAMBER KIT ROSE JOINT *FOR DA 90-93

FRONT LOWER ARM BUSH

6 PCS/SET UPRATED RUBBER BUSHES. INCLUDING COMPLIANCE BUSHING EK JDM 97-00 / USDM EK 99-00 SI

FRONT UPPER ARM

2 PCS/SET ROSE JOINT

FRONT LOWER CONTROL ARM

2 PCS/SET UPRATED RUBBER BUSHES OE STYLE/BLACK COMPLIANCE BUSHING INCLUDED *FOR JDM / SI USDM

FRONT UPPER ARM BALL JOINT

1 PCS/SET