HONDA INTEGRA DC2

36MM FRONT WHEEL HUB & BEARING KIT

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

FRONT UPPER ARM ADJUSTABLE

2 PCS/SET CAMBER KIT UPRATED RUBBER BUSHES

REAR UPPER ARM ADJUSTABLE

2 PCS/SET CAMBER KIT UPRATED RUBBER BUSHES

FRONT COMPLIANCE BUSH

2 PCS/SET UPRATED RUBBER BUSHES

FRONT ANTI ROLL BAR LINK REINFORCED

2 PCS/SET *SUITABLE FOR INTEGRA DC2 / CIVIC EG WITH DC2 ANTI ROLL BAR CONVERSION

REAR TOE ARM ADJUSTABLE

2 PCS/SET TOE KIT UPRATED RUBBER BUSHES

FRONT LOWER ARM

2 PCS/SET OE STYLE UPRATED RUBBER BUSHES

REAR TRAILING ARM BUSH

2 PCS/SET UPRATED RUBBER BUSHES

GEAR SHIFTER BUSH KIT REINFORCED

4 PCS/SET * FOR CIVIC EG/EK/DC2 * FOR DOHC

INNER TIE ROD

2 PCS/SET OE STYLE * FOR INTEGRA DC 94-97

REAR ANTI ROLL BAR LINK REINFORCED

2 PCS/SET STEEL BODY *FOR OE ANTI ROLL BAR

REAR TOE ARM ADJUSTABLE

2 PCS/SET TOE KIT ROSE JOINT

FRONT LOWER ARM

2 PCS/SET OE STYLE ROSE JOINT

ARM BUSHES COMPLETE SET

26 PCS/SET UPRATED RUBBER BUSHES USDM/JDM

ARM BUSHES COMPLETE SET

24 PCS/SET UPRATED RUBBER BUSHES FOR JDM DC2 TYPE-R

UPRATED ENGINE MOUNT

5 PCS/SET FOR MT B16/B18 RACE VERSION

FRONT UPPER ARM BUSH

4 PCS/SET UPRATED RUBBER BUSHES

FRONT LOWER ARM BUSH

6 PCS/SET UPRATED RUBBER BUSHES INCLUDING COMPLIANCE BUSHING

REAR LOWER ARM BUSH

4 PCS/SET UPRATED RUBBER BUSHES. FOR JDM EG/DC2 TYPE-R

REAR CAMBER KIT BUSHES

4 PCS/SET UPRATED RUBBER BUSHES FOR DA 90-93

TOE CONTROL ARM BUSH

4 PCS/SET UPRATED RUBBER BUSHES

ARM BUSHES COMPLETE SET

26 PCS/SET UPRATED RUBBER BUSHES FOR USDM

REAR LOWER ARM

2 PCS/SET OE STYLE / USDM UPRATED RUBBER BUSHES SHOCK BUSHING: 40MM

REAR UPPER ARM ADJUSTABLE

2 PCS/SET CAMBER KIT ROSE JOINT *FOR DA 90-93