INFINITI
-
-
-
-
-
-
-
-
FRONT LOWER CONTROL ARM2 PCS/SET *FOR JDM / SI USDM ROSE JOINT FRONT SIDE + SHOCK BUSHING UPRATED RUBBER COMPLIANCE BUSHING
£462.11 £385.09Delivery in
3-7 Working days -
-
REAR ANTI ROLL BAR BUSH2 PCS/SET FOR JDM TYPE-R REAR 23MM
£26.29 £21.91Delivery in
1-2 Working days -
-
REAR ANTI ROLL BAR LINK REINFORCED2 PCS/SET EXTREME LOWER CAR ONLY LOCATION: REAR SIDE
£72.89 £60.74Delivery in
15-22 Working days -
-
REVERSE ROLL CENTRE TIE ROD END2 PCS/SET UPSIDE DOWN INSTALLATION *FOR TRACK & MORE THAN 2-INCH LOWERED ONLY
£210.00 £175.00Delivery in
1-2 Working days -
TIE ROD END4 PCS/SET INCLUDING HARD TIE ROD UPSIDE DOWN INSTALLATION *FOR TRACK & MORE THAN 2-INCH LOWERED ONLY
£273.02 £227.52Delivery in
3-7 Working days -
-
HONDA CIVIC/INTEGRA FRONT 4Hx100 36mm HUB KIT 2PCS/SET EXTENDED WHEEL STUDSFor 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).
£373.39 £311.16Delivery in
15-22 Working days -
HONDA CIVIC K-SERIES ENGINE SWAP KIT 6PCS/SET WITH MANUAL TRANSMISSION* For Accord '03-07/ TSX '04-08 Manual Transmission" Civic '92-96 or Integra '94-01 Subframe Swap Required3 MOUNTS/SET
£793.39 £661.16Delivery in
15-22 Working days -
HONDA CIVIC EG/EK FRONT WHEEL BEARING KIT 2PCS MADE IN JAPAN ID=43mm/OD=79mmMade in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only
£186.70 £155.58Delivery in
3-7 Working days -
-
FRONT LOWER ARM BUSHING - REAR COMPLIANCE HONDA CIVICHarden Rubber Equipped2 PCS/SET
£233.29 £194.41Delivery in
15-22 Working days -
FRONT UPPER ARM ADJUSTABLE2 PCS/SET CAMBER KIT ROSE JOINT *FOR DA 90-93
£761.72 £634.77Delivery in
15-22 Working days -
-
REAR ANTI ROLL BAR AND CHASSIS BRACE KIT8 PCS/SET 25.4MM ANTI ROLL BAR NOT FOR EK9 TYPE-R
£373.39 £311.16Delivery in
1-2 Working days