LUXGEN

REAR LOWER ARM

2 PCS/SET ALUMINUM / USDM UPRATED RUBBER BUSHES SHOCK BUSHING: 50MM

UPRATED ANTI ROLL BAR BUSH

2 PCS/SET ON THE ANTI ROLL BAR + COLLAR INTEGRA TYPE-R

FRONT CAMBER ARM ADJUSTABLE

2 PCS/SET BUSHING NOT INCLUDED

FRONT CAMBER ARM ADJUSTABLE

2 PCS/SET UPRATED RUBBER BUSHES

REAR CAMBER ARM ADJUSTABLE

2 PCS/SET FOR EXTREME CAMBER ONLY -4 DEGREE PLUS UPRATED RUBBER BUSHES.

REAR TOE CONTROL ARM ADJUSTABLE

2 PCS/SET UPRATED RUBBER BUSHES.

ANTI ROLL BAR DROP LINK ADJUSTABLE

2 PCS/SET RANGE: 65-75MM BALL STUD: M10

FRONT CAMBER BALL JOINT ADJUSTABLE

2 PCS/SET CAMBER ADJUSTABLE

REAR STRUT CROSSBRACE

1 PCS/SET

FRONT UPPER ARM ADJUSTABLE

2 PCS/SET CAMBER/CASTER KIT CAMBER/CASTER +/-2 DEGREES BUSHINGS NOT INCLUDED

UPRATED ENGINE MOUNT

1 PCS/SET FRONT SIDE / MT

FRONT STRUT BRACE

1 PCS/SET

FRONT LOWER BRACE

1 PCS/SET

BRAKE MASTER CYLINDER STOPPER

1 PCS/SET * FOR LEFT-HAND DRIVE CARS

BRAKE MASTER CYLINDER STOPPER

1 PCS/SET * FOR LEFT-HAND DRIVE CARS

UPRATED ENGINE MOUNT

1 PCS/SET RACE VERSION LOCATION: LEFT SIDE

ENGINE MOUNT - RIGHT

1 PCS/SET FOR MT RIGHT SIDE

FRONT UPPER ARM BUSH - OFFSET

6 PCS/SET UPRATED RUBBER BUSHES CAMBER-0.5°, CASTER+0.5°

REPLACEMENT BALL JOINT FOR #6484

1 PCS/SET FOR #6484

REPLACEMENT ROSE JOINT BUSH FOR #7767

2 PCS/SET FOR #7767

FRONT ROLL CENTER ADJUSTER

2 PCS/SET HEIGHT +10MM * 19 INCH UP WHEELS REQUIRED

FRONT LOWER STOPPER LINK

2 PCS/SET ADJUSTABLE CASTER +1 -0.5 DEGREE

36MM FRONT WHEEL HUB & BEARING KIT

4 PCS/SET *CIVIC EG/EK: -FITS 79MM KNUCKLES ONLY (W/43MM ID BEARINGS & 262MM OE ROTORS). -DOES NOT FIT 73MM KNUCKLES (W/38MM ID BEARINGS & 240MM OE ROTORS). FOR 36MM (NUT SIZE) AXLE PCD: 4HX100 WITH EXTENDED WHEEL STUDS BEARING ID=43MM/OD=79MM (MADE IN JA

FRONT LOWER ARM BUSH

4 PCS/SET * FOR '14-15 SI ' COMPLIANCE BUSHING: 16MM UPRATED RUBBER BUSHES