TESLA

FRONT UPPER ARM BUSH KIT

6 PCS/SET ROSE JOINTS NO PRESS NECESSARY

REAR ANTI ROLL BAR BUSH

2 PCS/SET REAR - 19MM

FRONT LOWER ARM BUSH

4 PCS/SET ROSE JOINTS

FRONT ANTI ROLL BAR BUSH

2 PCS/SET 18MM

GEAR SHIFTER BUSH

4 PCS/SET FOR EG/EK/DC2 SOHC

FRONT ANTI ROLL BAR BUSH

2 PCS/SET 24MM, SO/NON TYPE-R

FRONT UPPER ARM ADJUSTABLE

2 PCS/SET CAMBER KIT BUSHINGS NOT INCLUDED

REAR ANTI ROLL BAR BUSH

2 PCS/SET REAR 15MM

REAR ANTI ROLL BAR BUSH

2 PCS/SET FOR JDM TYPE-R REAR 23MM

REINFORCED TOP MOUNT BUSH

4 PCS/SET

FRONT LOWER ARM

2 PCS/SET OE STYLE UPRATED RUBBER BUSHES

SUBFRAME BRACE REINFORCED

5 PCS/SET DIRECT BOLT-ON PARTS IS COMPATIBLE WITH THESE ANTI REAR ANTI ROLL BARS: * HARDRACE 25.4MM HOLLOW BAR * MUGEN 26MM SWAYBAR * OEM INTEGRA/CIVIC TYPE R 22-23MM ANTI ROLL BAR

REPLACEMENT UPRATED RUBBER BUSH FOR #7114

3 PCS/SET FOR #7114

REAR ANTI ROLL BAR LINK SPACER

2 PCS/SET

FRONT COMPLIANCE BUSH

2 PCS/SET OFFSET BUSHING INCREASE CASTER *NOT COMPATIBLE WITH #Q0098 & #Q0137 ROSE JOINT

FRONT UPPER ARM BUSH

4 PCS/SET OFFSET FUNCTION CAMBER + CASTER ADJUSTMENT UPRATED RUBBER BUSHES

FRONT COMPLIANCE BUSH

2 PCS/SET OFFSET BUSHING INCREASE CASTER UPRATED RUBBER BUSHES

FRONT LOWER SHOCK ABSORBER BUSH

2 PCS/SET EK: USDM EK ONLY ROSE JOINT OILLESS BEARING

REAR LOWER ARM

2 PCS/SET * FOR JDM EG/TYPE-R ALUMINUM / JDM ROSE JOINT

FRONT SHOCK ABSORBER FORK

2 PCS/SET * EXTREME LOW * 0.5KG LIGHTER THAN OE PER SIDE * NOT COMPATIBLE WITH RC BALL JOINTS ALUMUNUM 25MM SHORTER DESIGN

GEAR LINKAGE BUSH - SOLID

5 PCS/SET FOR DOHC

HONDA CIVIC/INTEGRA FRONT 4Hx100 36mm HUB KIT 2PCS/SET EXTENDED WHEEL STUDS

For 36mm (Nut Size) Axle UsePCD: 4Hx100 With Extended Wheel Studs2PCS/SET*Civic EG/EK: -Fits 79mm knuckles Only (w/43mm ID bearings & 262mm OE rotors). -Does not fit 73mm knuckles (w/38mm ID bearings & 240mm OE rotors).

CIVIC/INTEGRA FRONT CASTER ADJUSTING KIT 32PCS/SET CASTER +0-+25°

Caster Adjustment Range: +0°2.5°* Civic EK '96-00: For USDM EJ6/7/8 Use Only32 PCS/SET

HONDA CIVIC EG/EK FRONT WHEEL BEARING KIT 2PCS MADE IN JAPAN ID=43mm/OD=79mm

Made in JapanID=43mm/OD=79mm 2 PCS/SET*Civic EG/EK: Fits 79mm knuckles Only